China Gold Supplier for Smart Vision CO2 Laser Cutter for Fabric with Camera to Liverpool Factory
Model No.:
Introduction:
Detail:
Versatile Vision CO2 Laser Cutter with Camera
ZDMJG-160100LD
• One shot format up to 1600mm, direct extraction of contour cutting, process supporting partial or total modification.
• This laser cutter can realize continuous feeding, auto-recognition and cutting, process can be adjusted, without affecting the cutting accuracy, avoid errors due to feeding.
• Software enables man-machine interaction, real-time validation cutting path.
• This laser cutter can achieve inside and outside contour cutting.
• When cutting multiple graphics, you can specify the size of the graphic cut.
• It has the 5th generation CCD multi-template cutting function.
• The projector can be mounted on the inner projection format graphics exact positioning without alignment template
• The projector can be mounted alternatively to precise positioning projection of the graphics within the format, no required alignment template.
| Two recognition mode | |
| Edge-seeking recognition mode | Multi-template recognition mode |
| √√√ No limitation of graphic size or templates. One time shooting of camera, any complex graphics can be precisely cut. | |
 |
 |
|
Machining process (As shown above) 1、Camera shooting graphics 2、Vision software to extract contour of graphics (the red mark part as above) 3、Laser cutting along the red outline |
Machining process (As shown above) 1、The camera captures the whole pattern 2、Import graphics templates in the Template Management (the vector drawing part as above) 3、Laser cutting with template |
| Advantages: Always recognition of the contour of graphics even if material is deformed stretching. | Advantages: suitable for any graphics |
The 5th Generation Intelligent Vision System
› Camera up to 25 FPS, one time calibrate for work.
› Professional light sources, red and white light convert freely, equipped with cooling systems.
› Up to 100 graphics multimode processing, multi-layer settings for half-cut and full-cut.
› Precise joint identify cutting for large graphics.
› Support extra assembly on any Golden Laser machine.
Multi-templates Feature Points Positioning Cutting
› Suitable for positioning cutting of various small size patterns
› It can set positioning template of the whole pattern or partial pattern
› Supported not more than 100 graphics cutting at the same time and no limitation on angles.
Mark Point Positioning Cutting and Joint Identify Cutting
› Suitable for oversized graphics or printed garment pattern cutting.
› No limitation on graphic size, shape or marshalling sequence.
› Oversized pattern profile can be extracted through precise joint shooting.
› You can choose any two points of pattern as the Mark Point.
Product detail pictures:
Being supported by an advanced and professional IT team, we could offer technical support on pre-sales & after-sales service for , The product will supply to all over the world, such as: Ethiopia, Irish, Romania, Our company always concentrate on the development of the international market. We now have a lot of customers in Russia , European countries, the USA, the Middle East countries and Africa countries. We always follow that quality is foundation while service is guarantee to meet all customers.
