Nyefee igwe na-egbutu laser maka teepu ntụgharị
Nọmba nlereanya: LC230
Okwu mmalite:
The laser finishing technology bụ karịsịa irè maka ịcha reflective film, nke na-apụghị bee site na iji omenala mma cutters. LC230 laser die cutter na-enye ngwọta nkwụsịtụ maka ịtọpụ, laminating, wepụ ihe mkpofu matrix, slitting na rewinding. Na nke a reel ka reel laser finishing technology, ị nwere ike mezue dum agwụcha usoro na otu ikpo okwu na otu ngafe, na-enweghị na-eji anwụ anwụ.
GOLDEN Laser LC230 Digital Laser Die Cutter, site na mpịakọta gaa na mpịakọta, (ma ọ bụ mpịakọta gaa na mpempe akwụkwọ), bụ usoro ọrụ na-akpaghị aka zuru oke.
Enwere ike ịmegharị ihe, ikpochapụ ihe nkiri, lamination nke onwe ya, ịcha ọkara (ịcha nsusu ọnụ), ịkpụcha ya yana perforation, iwepụ ihe mkpofu, slitting maka rewinding na mpịakọta. Ngwa ndị a niile mere n'otu akụkụ n'ime igwe na-eji ngwa ngwa na nhazi ngwa ngwa.
Enwere ike ịkwado ya na nhọrọ ndị ọzọ dịka ihe ndị ahịa chọrọ. Dịka ọmụmaatụ, gbakwunye nhọrọ guillotine iji bee transversely iji mepụta mpempe akwụkwọ.
LC230 nwere ihe ngbanwe maka nzaghachi na ọnọdụ nke ihe ebibiri ma ọ bụ tupu anwụ anwụ.
Igwe ahụ nwere ike ịrụ ọrụ na-aga n'ihu site na 0 ruo 60 mita kwa nkeji, na ọnọdụ ịkpụ efe efe.
Nleba anya nke LC230 Laser Die Cutter
Chọpụta profaịlụ zuru ezu nke LC230
Ngalaba igbutu Laser
Ntughari ugboro abụọ
Mgbawa Razor
Mwepụ Matrix efu
Golden Laser System Uru
Laser ịcha teknụzụ
Ngwọta dị mma maka imepụta ihe n'oge, obere ọsọ na geometry mgbagwoju anya. Na-ewepụ ngwa ngwa siri ike ọdịnala & nrụpụta, ndozi na nchekwa.
Ọsọ nhazi ngwa ngwa
Mkpụcha zuru ezu (ngụkọta ịkpụ), ịkpụ ọkara (nsusu ọnụ), perforate, kanye-mark & akara bee webụ na ụdị ịkpụ ịkpụ na-aga n'ihu.
Ịcha nkenke
Mepụta geometry gbagwojuru anya agaghị enweta ya site na iji ngwaọrụ igbutu anwụ anwụ. Ogo akụkụ kachasị elu nke enweghị ike ịmegharị ya na usoro igbuchapụ ọnwụ ọdịnala.
PC arụ ọrụ & ngwa ngwa
Site na PC Workstation ị nwere ike ijikwa parampat niile nke ọdụ laser, bulie okirikiri nhọrọ ukwuu maka oke webụ ọsọ & mkpụrụ, gbanwee faịlụ eserese ka ebipụ & bugharịa ọrụ na paramita niile na sekọnd.
Modularity na mgbanwe
Nhazi Modular. Nhọrọ dị iche iche dị iji megharịa na ịhazi usoro ahụ ka ọ dabara n'ọtụtụ dịgasị iche iche nke mgbanwe chọrọ. Enwere ike ịgbakwunye ọtụtụ nhọrọ n'ọdịnihu.
Sistemụ Ọhụụ
Na-enye ohere igbuchapụ ihe edobere n'ụzọ na-ezighi ezi yana ndebanye ebipụ ±0.1mm. Ọhụụ (ndebanye aha) usoro dị maka ịdenye ihe ndị e biri ebi ma ọ bụ tupu anwụ ịkpụ shapes.
Njikwa koodu nzuzo
Encoder iji jikwaa nri nri, ọsọ na idobe ihe.
Ike dị iche iche na mpaghara ọrụ
Ike laser dịgasị iche iche dị site na 100-600 Watts na mpaghara ọrụ site na 230mm x 230mm, ruo 350mm x 550mm
Ọnụ ọrụ dị ala
Ngosipụta dị elu, mkpochapụ ngwá ọrụ siri ike & ihe emeziwanye ihe na-ebute oke uru ruru oke.
Nkọwa nke LC230 Laser Die Cutter
| Ụdị No. | LC230 |
| Obosara Weebụ kacha | 230mm / 9" |
| Oke obosara nke nri | 240mm / 9.4" |
| Dayameta Weebụ kacha | 400mm / 15.7" |
| Ọsọ Weebụ kacha | 60m / min (dabere na laser ike, ihe na ịkpụ ụkpụrụ) |
| Isi iyi Laser | CO2 RF laser |
| Ike Laser | 100W / 150W / 300W |
| Izi ezi | ± 0.1mm |
| Ịnye ọkụ | 380V 50Hz / 60Hz, nkeji atọ |
Nlereanya igbupu laser ọzọ
Lelee ihe nkiri mbufe ihe ngosi LC230 Laser na-arụ ọrụ
| Igwe eji egbutu Laser anwụ LC230 | ||
| A. | Isi Nka na ụzụ Parameters | |
| Mpaghara ọrụ | Obosara 230mm, Ogologo ∞ | |
| Obosara Weebụ kacha | 230mm | |
| Ọsọ Weebụ kacha | Ruo 60m/min | |
| Dayameta | 2400mm (L) X 1800mm (W) X 1800mm (H) | |
| Ibu | 1500kg | |
| Oriri | 2KW | |
| Ịnye ọkụ | 380V / 220V atọ nkeji 50Hz / 60Hz | |
| B. | Nhazi ọkọlọtọ | |
| 1. | Wepụ | |
| Dayameta Weebụ kacha | 400mm | |
| Obosara Weebụ kacha | 230mm | |
| Isi | 3 inch | |
| Ogwe Na-agbasa Pneumatic | 3 inch | |
| Njikwa esemokwu | Nhọrọ | |
| Okpokoro nkewa | Akwụkwọ ntuziaka | |
| Ntuziaka Weebụ | Ee | |
| 2. | Sistemụ laser | |
| Isi iyi Laser | Akara CO2 RF laser | |
| Ike Laser | 100W / 150W / 300W | |
| Ogologo ogologo Laser | 10.6 micron | |
| Ọnọdụ Laser Beam | Galvanometer | |
| Nha ntụpọ Laser | 210 microns | |
| Na-ajụ oyi | Mmiri jụrụ oyi | |
| 3. | Mwepụ Matrix | |
| Agbawa akụkụ azụ | Nhọrọ | |
| Matrix rewinding | Ee | |
| Ogwe Na-agbasa Pneumatic | 3 inch | |
| 4. | Ntughari | |
| Njikwa esemokwu | Nhọrọ | |
| Ogwe Na-agbasa Pneumatic | 3 inch | |
| C. | Nhọrọ | Ihe na-agbanwe agbanwe na igwe nkụ UV |
| Laminating unit | ||
| Nkewa nkeji | ||
| ***Mara: Ka a na-emelite ngwaahịa mgbe niile, bikokpọtụrụ anyịmaka ọhụrụ nkọwa.*** | ||
Ụdị Goldenlaser nke Laser Die Cutters
| Ụdị No. | LC230 | LC350 |
| Oke. ịkpụ obosara | 230mm / 9 inch | 350mm / 13.7 ″ |
| Obosara webụ | 240mm / 9.4" | 370mm / 14.5 ″ |
| Dayameta weebụ kachasị | 400mm / 15.7 ″ | 750mm / 23.6 ″ |
| Ọsọ webụ | 0-60m/min | 0-120m/min |
| (Ọsọ na-adịgasị iche dabere na ihe na ịcha ụkpụrụ) | ||
| Ụdị laser | CO2 RF metal laser | |
| Ike laser | 100W / 150W / 300W | 150W / 300W / 600W |
| Akụkụ | 2400mm (L) X 730mm (W) X 1800mm (H) | 3580mm (L) X 2200mm (W) X 1950mm (H) |
| Ibu | 1500kg | 3000kg |
| Ọrụ ọkọlọtọ | Ịcha zuru oke, igbucha nsusu ọnụ (ịcha ọkara), nsị, ihe osise, akara, wdg. | |
| Ọrụ nhọrọ | Lamination, UV varnish, slitting, wdg. | |
| Ihe nhazi | Ihe nkiri plastik, akwụkwọ, akwụkwọ na-egbuke egbuke, akwụkwọ matt, polyester, polypropylene, BOPP, plastik, ihe nkiri, polyimide, teepu na-egbuke egbuke, wdg. | |
| Ụdị eserese akwadoro | AI, BMP, PLT, DXF, DST | |
| Ịnye ọkụ | 380V 50HZ ma ọ bụ 60HZ / atọ na-adọ | |
Ngwa
Ihe na-atụgharị uche, teepu na-atụgharị uche, ihe nkiri na-ebufe, Nlegharị anya maka uwe elu dị elu, ntụgharị ntụgharị uche, Aramid dabeere ire ere retardant retro-reflective fabric, wdg.
Nlereanya ịcha laser
Biko kpọtụrụ goldenlaser maka ozi ndị ọzọ. Azịza gị nke ajụjụ ndị a ga-enyere anyị aka ịkwado igwe kacha dabara adaba.
1. Kedu ihe a kapịrị ọnụ ka ịchọrọ ịkpụ laser? Gịnị bụ obosara mpịakọta (ma ọ bụ nha) na ọkpụrụkpụ?
2. Gịnị bụ ngwaahịa ikpeazụ? (ụlọ ọrụ ngwa?)
Nọmba nlereanya: LC8060 (isi abụọ)
