Isticmaalka GOLDENLASER Systems oo ku raaxaysanaya wax soo saarkaaga.
Cutter laser oo otomaatig ah oo leh Kamarada CCD iyo Roll Feeder
Qaabka No.: ZDJG-3020LD
Hordhac:
- Korontada CO2 Laser laga bilaabo 65 watts ilaa 150 watts
- Ku habboon in la gooyo xargaha iyo calaamadaha duudduuban ee ballaca 200mm gudahooda
- Goynta buuxda ee duubka ilaa qaybo
- Kamarada CCD si loo aqoonsado qaababka summada
- Qaadista miiska shaqada iyo quudiyaha duubka - Habayn toos ah oo toos ah
Tilmaamaha
Qeexitaannada Farsamo ee ugu Muhiimsan ee ZDJG-3020LD CCD Qalabka Laser-ka ee Kaamirada
| Nooca Laser | CO2 DC tube laser galaas |
| Awoodda leysarka | 65W / 80W / 110W / 130W / 150W |
| Goobta shaqada | 300mm×200mm |
| Shaxda Shaqada | Qaadista miiska shaqada |
| Meelaynta Saxnaanta | ±0.1mm |
| Nidaamka Mooshinka | Matoorka tallaabo |
| Nidaamka qaboojinta | Qaboojiyaha heerkulka joogtada ah |
| Nidaamka Quudinta | 550W ama 1100W nidaamka daajinta |
| Dulitaanka Hawada | Mini kombaresarada hawada |
| Bixinta Korontada | AC220V± 5% 50/60Hz |
| Qaab Sawireedka Waa La Taageeray | PLT, DXF, AI, BMP, DST |
Tilmaamaha Mashiinka
Faa'iidooyinka Goynta Laser
Agabka iyo Warshadaha lagu dabaqi karo
Ku habboon summada tolmada leh, summada daabacan, summada daabacan, Velcro, ribbon, webbing, iwm.
Dharka dabiiciga ah iyo kuwa synthetic, polyester, naylon, maqaar, warqad, iwm.
Lagu dabaqi karo calaamadaha dharka iyo soo saarista agabka dharka.
Qaar ka mid ah Muunadaha Goynta Laser-ka
Waxaan had iyo jeer kuu keenaynaa fudud, degdeg ah, shaqsi iyo xalal processing laser kharash-ool ah.
Qiyaasta Farsamada
| Qaabka NO. | ZDJG3020LD |
| Nooca Laser | CO2 DC tube laser galaas |
| Awoodda leysarka | 65W 80W 110W 130W 150W |
| Goobta shaqada | 300mm×200mm |
| Shaxda Shaqada | Qaadista miiska shaqada |
| Meelaynta Saxnaanta | ±0.1mm |
| Nidaamka Mooshinka | Matoorka tallaabo |
| Nidaamka qaboojinta | Qaboojiyaha heerkulka joogtada ah |
| Nidaamka Quudinta | 550W ama 1100W nidaamka daajinta |
| Dulitaanka Hawada | Mini kombaresarada hawada |
| Bixinta Korontada | AC220V± 5% 50/60Hz |
| Qaab Sawireedka Waa La Taageeray | PLT, DXF, AI, BMP, DST |
| Cabbirrada Dibadda | 1760mm(L)×740mm(W)×1390mm(H) |
| Miisaanka saafiga ah | 205KG |
*** Xusuusin: Sida badeecadaha si joogto ah loo cusboonaysiiyo, fadlan nala soo xidhiidh tilmaamihii ugu dambeeyay. ***
GOLDENLASER MARS Taxanaha Nidaamyada Laser-ka oo kooban
1. Mashiinada Goynta Laser oo leh Kamarada CCD
| Qaabka No. | Goobta shaqada |
| ZDJG-9050 | 900mm×500mm (35.4"×19.6") |
| MZDJG-160100LD | 1600mm×1000mm (63"×39.3") |
| ZDJG-3020LD | 300mm×200mm (11.8"×7.8") |
2. Mashiinada Goynta Laser oo leh suunka wareejinta
| Qaabka No. | Madaxa laser | Goobta shaqada |
| MJG-160100LD | Hal madax | 1600mm×1000mm |
| MJGHY-160100LD II | Laba madax | |
| MJG-14090LD | Hal madax | 1400mm×900mm |
| MJGHY-14090D II | Laba madax | |
| MJG-180100LD | Hal madax | 1800mm×1000mm |
| MJGHY-180100 II | Laba madax | |
| JGHY-16580 IV | Afar madax | 1650mm×800mm |
3. Mashiinnada wax lagu xardho ee Laser-ka oo leh Miis-shaqeedka Malabka
| Qaabka No. | Madaxa laser | Goobta shaqada |
| JG-10060 | Hal madax | 1000mm×600mm |
| JG-13070 | Hal madax | 1300mm×700mm |
| JGHY-12570 II | Laba madax | 1250mm×700mm |
| JG-13090 | Hal madax | 1300mm×900mm |
| MJG-14090 | Hal madax | 1400mm×900mm |
| MJGHY-14090 II | Laba madax | |
| MJG-160100 | Hal madax | 1600mm×1000mm |
| MJGHY-160100 II | Laba madax | |
| MJG-180100 | Hal madax | 1800mm×1000mm |
| MJGHY-180100 II | Laba madax |
4. Mashiinnada wax lagu xardho ee Laser-ka ah ee leh nidaamka qaadista miiska
| Qaabka No. | Madaxa laser | Goobta shaqada |
| JG-10060SG | Hal madax | 1000mm×600mm |
| JG-13090SG | 1300mm×900mm |
Qalabka iyo warshadaha lagu dabaqi karo
Ku habboon summada tolmada leh, summada daabacan, summada daabacan, Velcro, ribbon, webbing, iwm.
Dharka dabiiciga ah iyo kuwa synthetic, polyester, naylon, maqaar, warqad, fiberglass, Aramid, iwm.
Lagu dabaqi karo calaamadaha dharka iyo soo saarista agabka dharka.
Muunadaha Goynta Laser-ka
Fadlan kala xidhiidh goldenlaser wixii macluumaad dheeraad ah Jawaabtaada su'aalaha soo socda ayaa naga caawin doona inaan kugula talinno mashiinka ugu habboon.
1. Waa maxay shuruudahaaga habayn ee ugu weyn? Goynta laser ama xaradhka laysarka (calaamaynta) ama daloolinta laysarka?
2. Maxaa agab ah oo aad u baahan tahay si aad u farsamayso laysarka?
3. Waa maxay xajmiga iyo dhumucda alaabta?
4. Ka dib markii la farsameeyo laysarka, maxay noqon doontaa alaabta loo isticmaalo? (warshadaha codsiga) / Waa maxay badeecadaada ugu dambeysa?
5. Magaca shirkaddaada, website-kaaga, iimaylka, Tel (WhatsApp/WeChat)?
Halkan ku qor fariintaada oo noo soo dir
