Dijitalụ Laser Finisher maka Labels
Nọmba nlereanya: LC230
Okwu mmalite:
LC230 Label Laser Die Cutter bụ nhọrọ magburu onwe ya maka imecha mkpụmkpụ dijitalụ, na-enye oge mgbanwe mgbanwe efu na enweghị ụgwọ ọrụ. Teknụzụ a bụ onye mmekọ zuru oke maka igwe obibi akwụkwọ dijitalụ.
- Ogologo Weebụ kacha elu:230mm / 9"
- Ogologo Weebụ kacha elu:400mm / 15.7"
- Ọsọ Weebụ kacha elu:60m/min
- Ike Laser:100 Watt / 150 Watt / 300 Watt
LC230 bụ kọmpat, akụ na ụba na nke zuru okedigital laser anwụ cutter, dị naIsi Laser Single ma ọ bụ Dual. LC230 na-abịa ọkọlọtọna-ekpugharị, ịcha laser, rewindingnamkpofu matriksnkeji. A na-akwado ya maka modul tinye-na dịkaUV varnishing, laminationnaigbapu, wdg.
Enwere ike itinye usoro ahụndị na-agụ akwụkwọ koodumaka mgbanwe ụkpụrụ akpaka na ofufe.Stackersma ọ bụigwe rọbọt-na-ebeenwere ike ịgbakwunye maka angwọta akpaaka zuru oke.
LC230 na-enye ngwọta dijitalụ na akpaaka maka mpịakọta iji tụgharịa (ma ọ bụ mpịakọta na mpempe akwụkwọ) ịkpụ laser. Enweghị ego mgbakwunye ngwá ọrụ na oge nchere achọrọ, mgbanwe kacha mma iji mezuo ihe ndị ahịa chọrọ.
Uru nke Laser Die Cutter
The digital laser finisher "mpịakọta ka tụgharịa" maka laser ịkpụ na ịtụgharị.
• Mwepu (agụba, mkpa na ịkpụ akara)
• UV Varnishing
• Lamination
• Akara azụ (Nwara) nke Liner
• Nduzi Weebụ akpaaka
• Mgbakọ Mgbanwe Liner (N'elu ma ọ bụ N'okpuru)
• Barcode Reading - na-na-efegharị ọrụ mgbanwe
• Mwepụ Matrix
• Ntugharị ugboro abụọ
• Ngalaba ndokọba
• Mpempe akwụkwọ mpempe akwụkwọ nwere tebụl nfefe na-agbanwe agbanwe
Nkọwa ngwa ngwa
Isi nka nka nke LC230 Digital Laser Die Cutter
| Ụdị No. | LC230 |
| Oke. ịkpụ obosara | 230mm / 9" |
| Oke. ịcha ogologo | Enweghị oke |
| Oke. obosara nke nri | 240mm / 9.4" |
| Oke. dayameta weebụ | 400mm / 15.7" |
| Ọsọ webụ | 0-60m / min (Ọsọ dịgasị iche dabere na ihe na ịkpụ ụkpụrụ) |
| Izi ezi | ± 0.1mm |
| Ụdị laser | CO2 RF metal laser |
| Ike laser | 100W / 150W / 300W |
| Ịnye ọkụ | 380V atọ agba 50/60Hz |
Usọ ọrụ
Na-ebufe atụmatụ
Nkwado .dxf, .dst, .jpg, .ai, .plt, .bmp. wdg.
Ntọala paramita
Ike Laser, ọsọ na-arụ ọrụ, labaels nke ukwuu iji bee, wdg.
Malite ịcha
Kọmputa na-akpaghị aka chekwaa parampat maka otu ihe na ụkpụrụ
Nlereanya ịcha laser
Lelee Laser anwụ na-egbutu ka ọ na-arụ ọrụ!
Digital Laser Die Cutter maka akara 100 Watts LC230
Nka nka nke Digital Laser Die Cutter LC230
| Isi Nka na ụzụ Parameters | |
| Mpaghara ọrụ | Obosara 230mm (9 ″), Ogologo ∞ |
| Ọsọ | 0-60m / min (dabere na laser ike na ịkpụ ụkpụrụ) |
| Akụkụ igwe | 2400mm (L) X 730mm (W) X 1800mm (H) |
| Ibu | 1500kg |
| Oriri | 2KW |
| Ịnye ọkụ | 380V / 220V, 50Hz / 60Hz, nkeji atọ |
| Nhazi ọkọlọtọ | |
| Wepụ | |
| Obosara Weebụ kacha | 240mm (9.4 ″) |
| Dayameta Weebụ kacha | 400mm (15.7 ") |
| Isi | 3 inch |
| Ogwe Na-agbasa Pneumatic | 3 inch |
| Njikwa esemokwu | Nhọrọ |
| Okpokoro nkewa | Nhọrọ |
| Ntuziaka Weebụ | BST / EURDOW (Nhọrọ) |
| Sistemụ laser | |
| Isi iyi Laser | Akara CO2 RF laser |
| Ike Laser | 100W / 150W / 300W |
| Ogologo ogologo Laser | 10.6 micron ma ọ bụ ndị ọzọ |
| Ọnọdụ Laser Beam | Galvanometer |
| Nha ntụpọ Laser | 210 microns |
| Usoro jụrụ oyi | Mmiri jụrụ oyi |
| Mwepụ Matrix | |
| Agbawa akụkụ azụ | |
| Matrix rewinding | |
| Ogwe Na-agbasa Pneumatic | 3 inch |
| Ntughari | |
| Njikwa esemokwu | Nhọrọ |
| Ogwe Na-agbasa Pneumatic | 3 inch |
| Nhọrọ | |
| UV Varnishing unit | |
| Laminating unit | |
| Nkewa nkeji | |
*** Cheta na: Dị ka ngwaahịa na-mgbe niile emelitere, biko kpọtụrụ anyị maka ọhụrụ nkọwa.***
Ụdị Laser nke ọla edo nke Digital Laser Die Cutters
| Ụdị No. | LC230 | LC350 |
| Oke. ịkpụ obosara | 230mm / 9 inch | 350mm / 13.7 ″ |
| Obosara webụ | 240mm / 9.4" | 370mm / 14.5 ″ |
| Dayameta weebụ kachasị | 400mm / 15.7 ″ | 750mm / 29.5 ″ |
| Ọsọ webụ | 0-60m/min | 0-120m/min |
| (Ọsọ na-adịgasị iche dabere na ihe na ịcha ụkpụrụ) | ||
| Ụdị laser | CO2 RF metal laser | |
| Ike laser | 100W / 150W / 300W | 150W / 300W / 600W |
| Akụkụ | 2400mm (L) X 730mm (W) X 1800mm (H) | 3700mm (L) X 2000mm (W) X 1820mm (H) |
| Ibu | 1500kg | 3000kg |
| Ọrụ ọkọlọtọ | Ịcha zuru oke, igbucha nsusu ọnụ (ịcha ọkara), nsị, ihe osise, akara, wdg. | |
| Ọrụ nhọrọ | Lamination, UV varnish, slitting, wdg. | |
| Ihe nhazi | PET, akwụkwọ, akwụkwọ kenkowaputa, akwụkwọ matt, polyester, polypropylene, BOPP, plastik, ihe nkiri, polyimide, teepu na-egosipụta, akwa ákwà, akwụkwọ aja, wdg. | |
| Ụdị eserese akwadoro | AI, BMP, PLT, DXF, DST | |
| Ịnye ọkụ | 380V 50HZ ma ọ bụ 60HZ / atọ na-adọ | |
Ngwa ntụgharị laser
Ihe ndị a na-ejikarị eme ihe maka igwe ịcha ọkụ laser anwụ gụnyere:
Akwụkwọ, plastic film, kenkowaputa akwụkwọ, matt akwụkwọ, sịntetik akwụkwọ, kaadiboodu, polyester, polypropylene (PP), PU, PET, BOPP, plastic, film, microfinishing film, wdg.
Ngwa ndị a na-ahụkarị maka igwe ịcha ọkụ laser anwụ gụnyere:
- Akara aha
- Akara nrapado na teepu
- Ihe nkiri na-atụgharị anya teepu / Retro Reflective
- teepu ụlọ ọrụ / 3M teepu
- Mpempe akwụkwọ / akwụkwọ mmado
- Abrasives
- Gasket
Biko kpọtụrụ Golden Laser maka ozi ndị ọzọ. Azịza gị nke ajụjụ ndị a ga-enyere anyị aka ịkwado igwe kacha dabara adaba.
1. Gịnị bụ isi nhazi gị chọrọ? Nyefee na-atụgharị? Ma ọ bụ mpempe akwụkwọ?
2. Kedu ihe dị mkpa iji mee ka usoro laser?Kedu nha na ọkpụrụkpụ nke ihe?
3. Kedu ngwaahịa ikpeazụ gị(ụlọ ọrụ ngwa)?
