Dual Head Vision Scan Sublimation Fabric Laser Cutter
Tusaalaha No.: CJGV-160120LD
Hordhac:
Vision Laser waxay ku habboon tahay in la gooyo dhar sare oo dhammaan qaababka iyo cabbirrada. Kamaradu waxay baadhaan dunta, ogaadaan oo aqoonsadaan konturrada daabacan, ama waxay soo qaadaan calaamadaha diiwaangelinta oo gooya naqshadaha la doortay si degdeg ah iyo saxsanaan. Gaadhi-qaade iyo feedhiyaha otomaatiga ah ayaa loo isticmaalaa si loo sii gooyo si joogto ah, wakhtiga loo badbaadiyo loona kordhiyo xawaaraha wax soo saarka.
- Goobta shaqada:1600mm×1200mm (63"×47.2")
- Goobta iskaanka kamarada:1600mm×800mm (63"×31.4")
- Aagga ururinta:1600mm×600mm (63"×23.6")
- Awoodda leysarka:150W, 300W
- Xawaaraha goynta:0-800 mm/s
• Iyadoo duubka dharka sare lagu quudinayo miiska gaadiidka qaada, nidaamka aragu si degdeg ah ayuu u shaqeeyaa.iskaan duqsiga konturrada daabacanoo si toos ah u abuura faylka vector. Waxay wanaajisaa isticmaalka maro daabacan iyadoo tignoolajiyada iskaanka aragga ay sariirta oo dhan ku baarto 5 ilbiriqsi gudahood ka hor inta aysan bilaabin habka goynta.
Haddii kale, thecalaamadaha diiwaangelintawaxaa si sax ah u akhrin kara kamaradu, taas oo u oggolaanaysa algorithm caqli-gal ahmagdhow wixii qallooc ama kala bax ahoo laga yaabo inay ku dhacaan duubab dunta oo aan degganayn.
• Madax-bannaanida laba-labalaha laysarkaisku mar gooya meelaha loo qoondeeyay, hufnaanta hab-socodka sare.
• Marka lagu daro2 kamaradaha warshadaha ee dusha sare ah, aKamarada CCDiyo adiiwaangelintakamaradwaxaa lagu dhejin karaa mid kasta oo ka mid ah labada madax ee laysarka si loo aqoonsado saxda ah iyo goynta sawirada yaryar sida sumadaha daabacan, calaamadaha tolmada leh,dheeha-subxarfo/lambaro/logos, iwm.
• Asariir qaadeiyoauto-quudiyewaxaa loo isticmaalaa si loo sii gooyo si joogto ah, badbaadinta wakhtiga iyo kordhinta xawaaraha wax soo saarka.
• Miiska fidintawaa mid ku habboon in la soo qaado qaybaha la gooyey.
Tilmaamaha Gaarka ah
Soo hel sawiro badan oo mishiinka ku jira
Tilmaamaha
Halbeegyada Farsamo ee ugu Muhiimsan ee CJGV160130LD Vision Laser Cutter
| Goobta shaqada | 1600mm×1200mm (63"×47.2") |
| Goobta iskaanka kamarada | 1600mm×800mm (63"×31.4") |
| Aagga ururinta | 1600mm×500mm (63"×19.6") |
| Miiska shaqada | Qaadista miiska shaqada |
| Nooca laser | CO2 laser galaas / CO2 RF bir laser |
| Awoodda leysarka | 150W |
| Xawaaraha jarista | 0-800 mm/s |
| Meelaynta saxnaanta | ±0.1mm |
| Habka dhaqdhaqaaqa | Servo motor |
| Kamarada | kamaradaha warshadaha |
| Software | Goldenlaser CAD Baadhitaanka Software Xidhmada |
| Ikhtiyaarada | Quudiye otomaatik ah, dhibic cas, kamarada CCD ee diiwaangelinta |
HABKA SHAQADA 1 → Sawirka Duullimaadka
<< Tallaabada 1
Ku rarida dharka duuban ee dheeha-sublimeedka ah ee wareejinta miiska shaqada ee qalabka laysarka oo leh auto-quudiye.
Tallaabada 2
HD kamaradu waxay baadhayaan maryaha, ogaadaan oo aqoonsadaan safafka daabacan, oo u soo dira macluumaadka laysarka. >>
<< Tallaabada 3
Deji xuduudaha goynta. Riix badhanka "Start" ee qalabka laysarka. Markaas mishiinka goynta laysarka ayaa si toos ah u jari doona.
Tallaabada 4 Goynta laser oo ku celi habka oo dhan. >>
Shuruudda daabacaada- Shaxda daabacan iyo asalka agabku waxay leeyihiin farqi weyn oo midab leh, masaafo aan ka yarayn 5mm inta u dhaxaysa safafka. Lafaha dibadda oo kaliya ayaa la gooyn karaa, garaafyada buulka ah ee gudaha lama jari karo.
HABKA SHAQADA 2 → SCAN CALAAMADAHA DAABACADDA
Codsiga
- Qalabka jilicsan ee sahlan in la qalloociyo, duuduubo, la kordhiyo
- Qaabka adag, qaabka buul ee gudaha dulmar iyo shuruudaha goynta saxda ah ee sare
Shuruudaha
Baahida 1:1 faylka garaafyada daabacan ee asalka ah. Qaab sawireedka: *.jpg, *.bmp, ama *.png
Tusaalaha Goynta Laser Sublimation Fabrics - Kahor Goynta Laser VS. Goynta Laser ka dib
Kahor Goynta
Goynta ka dib
Aragtida Goldenlaser's Scanning System Laser waxay xallisay dhibaatada leexashada booska, xagasha wareega, iyo fidinta laastikada inta lagu jiro habka goynta dharka isboortiga.
Muunadaha Goynta Laser Vision
VISION LASER CUT - goynta laser horumarsan oo loogu talagalay dheeha sublimation dhar iyo dun daabacan
Daawo Muuqaalka Laser-ka oo shaqaynaya
Sawirka aragga ee Duullimaadyada Laser-ka-goynta loogu talagalay dheeha-sublimation Dharka iyo Maaskaro daabacan
VISION LASER CUT - mashiinka goynta laser horumarsan oo loogu talagalay sublimation dheeha, dharka daabacan iyo dunta
Baadhitaanka xawaaraha sare ee duulista, toosinta degdega ah, cidhifyada laysarka ee xidhan. Kaliya riix oo tag!
Qiyaasta Farsamada ee Gooyaha Laser-ka AraggaCJGV160120LD
| Goobta shaqada | 1600mm x 1200mm (63" x 47.2") |
| Goobta iskaanka kamarada | 1600mm x 800mm (63" x 31.4") |
| Aagga ururinta | 1600mm x 600mm (63"x23.6") |
| Miiska shaqada | Qaadista miiska shaqada |
| Nidaamka aragga | kamaradaha warshadaha |
| Awoodda leysarka | 150W, 300W |
| Tuubada laser | CO2 tube laser galaas / CO2 RF biraha laser tube |
| Matoorada | Matoorada Servo |
| Xawaaraha jarista | 0-800 mm/s |
| Nidaamka qaboojinta | Qaboojiyaha heerkulka joogtada ah |
| Habka daaqsinka | 1.1KW taageere xiiqsan x 2, 550W taageere dabaysha x1 |
| Korontada | 220V / 50Hz ama 60Hz / Hal waji |
| Heerka korantada | CE / FDA / CSA |
| Isticmaalka tamarta | 9KW |
| Software | Xidhmada Software Scanning GoldenLaser |
| Cabirka | L 3590mm x W 2205mm x H 2200mm (11.8' x 7.2' x 7.2') |
| Doorashooyin kale | Quudiye otomaatik ah, dhibic cas, kamarada CCD ee diiwaangelinta |
Laser-ka Dahabka ah - Range Full ee Nidaamyada Goynta Laser Vision
Ⅰ Taxanaha Goynta Xawaaraha Sare ee Duulimaadyada
| Qaabka No. | Goobta shaqada |
| CJGV-160100LD | 1600mm×1000mm (63"×39.3") |
| CJGV-160120LD | 1600mm×1200mm (63"×47.2") |
| CJGV-180100LD | 1800mm×1000mm (70.8"×39.3") |
| CJGV-180120LD | 1800mm×1200mm (70.8"×47.2") |
Ⅱ Goynta Saxnimada Sare ee Calaamadaha Diiwaangelinta
| Qaabka No. | Goobta shaqada |
| MZDJG-160100LD | 1600mm×1000mm (63"×39.3") |
Ⅲ Taxanaha Goynta Laser-Large Format
| Qaabka No. | Goobta shaqada |
| ZDJMCJG-320400LD | 3200mm×4000mm (126"×157.4") |
Ⅳ Aragti WacanLabada madax)Taxanaha Goynta Laser
| Qaabka No. | Goobta shaqada |
| QZDMJG-160100LD | 1600mm×1000mm (63"×39.3") |
| QZDXBJGHY-160120LDII | 1600mm×1200mm (63"×47.2") |
Ⅴ Taxanaha Goynta Kaamirada CCD
| Qaabka No. | Goobta shaqada |
| ZDJG-9050 | 900mm×500mm (35.4"×19.6") |
| ZDJG-3020LD | 300mm×200mm (11.8"×7.8") |
Tijaabooyinka Dharka Sare ee Laysarka Goynta
Goynta Laser-ka dharka hoostiisa oo leh geeso nadiif ah oo xiran
Laser goynta funaanadaha xeegada
Codsiga
→ Dharka isboortiga ee Jerseys (maalinnada kubbadda kolayga, funaanadda kubbadda cagta, funaanadda baseball, funaanadda xeegada barafka)
→ Dharka baaskiilka
→ Xiro firfircoon, lug-goysyo, xirashada yoga, xirashada qoob ka ciyaarka
→ Dharka dabaasha, bikinis
Sida bixiyaha xirfadle ah xal codsiga laser, GOLDEN Laser si joogto ah u cusub in nidaamka-xawaaraha sare iskaanka laser nidaamka goynta laysarka, sportswear-xawaaraha sare dalool nidaamka laser,-sax aragti sare aqoonsiga nidaamka goynta laser, iyo midaynta nidaamyada hawlgalkawarshadaha daabacaadda digital, waxaa ka go'an inuu ka caawiyo macaamiisha inay abuuraan qiimo weyn.
NIDAAMKA ARAGTIDA DAHABKA AH EE CAD
Habka baarista aragga ee GOLDEN CAD ujeedadiisu tahay in la xaqiijiyo is dhexgalka aan kala go 'lahayn iyo farsamaynta sare ee habka daabacaadda dhijitaalka ah. Naqshadeynta, darajooyinka, buul-saarka iyo hababka kale ayaa lagu dhex daray nidaamka baarista aragga ee GOLDEN CAD habka ugu kharashka badan waxayna si toos ah u soo saartaa qaababka faylka EPS iyo PDF ee daabacaha. Ugu dambeyntii, sax ahgoynta laser qalabka daabacan ee dhijitaalka ahwaa la fuliyay iyada oo ay ugu wacan tahay habka hufan ee sawirka aragga ee otomaatiga ah.
1. NAQLI
Qiimaynta iyo wax ka beddelka garaafyada naqshadaynta ee Software-ka Naqshadeeye Qaabka GOLDEN.
2. Wax-soo-saarka ka hor
Ku buul garaafyada nashqadaynta leh software AUTO MARKER si loo soo saaro qaabka PDF ee daabacaadda.
3. Daabacaadda
Udiraya feylasha PDF-ga daabacaha si loo daabaco ka dibna dheeha sublimation ilaa dhar.
4. Goynta Laser-ka
Mashiinka goynta laysarka Vision wuxuu baadhayaa sublimation dhar daabacan oo duudduuban, iyo kamarad ogaan contour daabacan oo u dirtaa macluumaadka kombuyuutarka iyo gooyaha laser, ka dibna laser gooyn si toos ah oo joogto ah.
Socodka Shaqada Dhaqanka ee Soo saarista Dharka Ciyaaraha 
Sidee Nidaamka Sawirka Aragtida DAHABIGA CAD u fududeeyaa habka wax soo saarka ee dharka ciyaaraha? 
WAA MAXAY FAA'IIDOOYINKA AY LEEYIHIIN NIDAAMKA SAANANKA ARAGTIDA DAHABIGA AH?
• La fududeeyo habka
• Keydso 60% qiimaha shaqada
• Keydso 35% la isticmaali karo – waraaqaha wareejinta/waqtiga daabacaadda/qalabka
• Keydso 10% isticmaalka khadka
• Meel dhig, kaydi qiimaha kaydinta
• Yaree heerka cilladda oo hubi tayada alaabta
Qaabka No.: CJGV-320400LD
