MARS Series CO2 Laser Cutting le Engraving Machine
Nomoro ea mohlala: MARS Series
Selelekela:
Letoto la MARS le na le mochini oa laser oa CO2 oa ho kena 'me o sebelisoa ke bareki ho seha le ho betla masela, letlalo, lehong, acrylics, polasetiki le tse ling tse ngata.
- Letoto le ikhethileng la mechini ea laser bakeng sa liindasteri tse fapaneng
- Mesebetsi e matla, ts'ebetso e tsitsitseng le e theko e tlaase
- Mefuta e fapaneng ea matla a laser, boholo ba bethe le litafole tsa mosebetsi ka boikhethelo
Mehaho e fapaneng ea sethala sa mosebetsi e teng
Khetho ea Sebaka sa Mosebetsi
MARS Series Laser Machines e tla ka mefuta e fapaneng ea boholo ba litafole, ho tloha ho 1000mmx600mm, 1400mmx900mm, 1600mmx1000mm ho isa 1800mmx1000mm.
Li-Wattages tse fumanehang
MARS Series Laser Machines e na le li-tubes tsa laser tsa khalase tsa CO2 DC tse nang le matla a laser ho tloha ho 80 Watts, 110 Watts, 130 Watts ho isa ho 150 Watts.
Lihlooho tse peli tsa Laser
Ho eketsa tlhahiso ea laser cutter ea hau, MARS Series e na le khetho ea li-lasers tse peli tse tla lumella hore likarolo tse peli li khaoloe ka nako e le 'ngoe.
Dikgetho tse ding
Tekheniki Parameters
| Mohlala No. | MJG-160100 | MJGHY-160100 II |
| Hlooho ea Laser | Hlooho e le 'ngoe | Hlooho e 'meli |
| Sebaka sa Mosebetsi | 1600mm×1000mm | |
| Mofuta oa Laser | CO2 DC khalase laser tube | |
| Matla a Laser | 80W / 110W / 130W / 150W | |
| Tafole ea Mosebetsi | Tafole ea ho sebetsa ea khekhe ea linotsi | |
| Sistimi ea Motion | Enjene ea mohato | |
| Boemo bo Nepahetseng | ±0.1mm | |
| Mokhoa oa ho Pholisa | Mocheso o tsitsitseng oa metsi a batang | |
| Sistimi ea Exhaust | 550W / 1.1KW Fane ea ho felloa ke matla | |
| Sistimi ea ho Fokotsa Moea | Mini air compressor | |
| Phepelo ea motlakase | AC220V ± 5% 50/60Hz | |
| Sebopeho sa Graphic se tšehelitsoe | AI, BMP, PLT, DXF, DST | |
| Litekanyo tsa ka ntle | 2350mm (L)×2020mm (W)×1220mm (H) | |
| Boima bo kahare | 580KG | |
| Mohlala No. | MJG-14090 | MJGHY-14090 II |
| Hlooho ea Laser | Hlooho e le 'ngoe | Hlooho e 'meli |
| Sebaka sa Mosebetsi | 1400mm×900mm | |
| Mofuta oa Laser | CO2 DC khalase laser tube | |
| Matla a Laser | 80W / 110W / 130W / 150W | |
| Tafole ea Mosebetsi | Tafole ea ho sebetsa ea khekhe ea linotsi | |
| Sistimi ea Motion | Enjene ea mohato | |
| Boemo bo Nepahetseng | ±0.1mm | |
| Mokhoa oa ho Pholisa | Mocheso o tsitsitseng oa metsi a batang | |
| Sistimi ea Exhaust | 550W / 1.1KW Fane ea ho felloa ke matla | |
| Sistimi ea ho Fokotsa Moea | Mini air compressor | |
| Phepelo ea motlakase | AC220V ± 5% 50/60Hz | |
| Sebopeho sa Graphic se tšehelitsoe | AI, BMP, PLT, DXF, DST | |
| Litekanyo tsa ka ntle | 2200mm (L)×1800mm (W)×1150mm (H) | |
| Boima bo kahare | 520KG | |
| Mohlala No. | JG-10060 | JGHY-12570 II |
| Hlooho ea Laser | Hlooho e le 'ngoe | Hlooho e 'meli |
| Sebaka sa Mosebetsi | 1m×0.6m | 1.25m×0.7m |
| Mofuta oa Laser | CO2 DC khalase laser tube | |
| Matla a Laser | 80W / 110W / 130W / 150W | |
| Tafole ea Mosebetsi | Tafole ea ho sebetsa ea khekhe ea linotsi | |
| Sistimi ea Motion | Enjene ea mohato | |
| Boemo bo Nepahetseng | ±0.1mm | |
| Mokhoa oa ho Pholisa | Mocheso o tsitsitseng oa metsi a batang | |
| Sistimi ea Exhaust | 550W / 1.1KW Fane ea ho felloa ke matla | |
| Sistimi ea ho Fokotsa Moea | Mini air compressor | |
| Phepelo ea motlakase | AC220V ± 5% 50/60Hz | |
| Sebopeho sa Graphic se tšehelitsoe | AI, BMP, PLT, DXF, DST | |
| Litekanyo tsa ka ntle | 1.7m (L)×1.66m (W)×1.27m (H) | 1.96m (L)×1.39m (W)×1.24m (H) |
| Boima bo kahare | 360KG | 400KG |
| Mohlala No. | JG13090 |
| Mofuta oa Laser | CO2 DC khalase laser tube |
| Matla a Laser | 80W / 110W / 130W / 150W |
| Sebaka sa Mosebetsi | 1300mm×900mm |
| Tafole ea Mosebetsi | Tafole e sebetsang ea thipa |
| Boemo bo Nepahetseng | ±0.1mm |
| Sistimi ea Motion | Enjene ea mohato |
| Mokhoa oa ho Pholisa | Mocheso o tsitsitseng oa metsi a batang |
| Sistimi ea Exhaust | 550W / 1.1KW Fane ea ho felloa ke matla |
| Sistimi ea ho Fokotsa Moea | Mini air compressor |
| Phepelo ea motlakase | AC220V ± 5% 50/60Hz |
| Sebopeho sa Graphic se tšehelitsoe | AI, BMP, PLT, DXF, DST |
| Litekanyo tsa ka ntle | 1950mm (L)×1590mm (W)×1110mm (H) |
| Boima bo kahare | 510KG |
Software ea Moloko oa Bohlano
Goldenlaser patented software e na le mesebetsi e matla ho feta, ts'ebeliso e matla le ts'epo e phahameng, e tlisang basebelisi mefuta e mengata ea boiphihlelo bo holimo.
Sehokelo se bohlale, skrineng sa 'mala oa 4.3-inch
Bokhoni ba polokelo ke 128M mme bo ka boloka lifaele tse fihlang ho 80
Tšebeliso ea thapo ea marang-rang kapa puisano ea USB
Lisebelisoa le Liindasteri tse sebetsang
SEBELISA MOSEBETSI OA OA MESEBETSI EA CO2 LASER 'E KE LE KETSO HO.
E loketse lesela, letlalo, acrylic, lehong, MDF, veneer, polasetiki, EVA, foam, fiberglass, pampiri, khateboto, rabara le lintho tse ling tse se nang tšepe.
E sebetsa ho liaparo le lisebelisoa, lieta tse ka holimo le li-soles, mekotla le lisutuk'heise, lisebelisoa tsa ho hloekisa, lintho tsa ho bapala, papatso, mesebetsi ea matsoho, mokhabiso, thepa ea ka tlung, liindasteri tsa khatiso le tsa ho paka, joalo-joalo.
CO2 Laser Cutter Engraver Technical Parameters
| Mofuta oa Laser | CO2 DC khalase laser tube |
| Matla a Laser | 80W / 110W / 130W / 150W |
| Sebaka sa Mosebetsi | 1000mm×600mm, 1400mm×900mm, 1600mm×1000mm, 1800mm×1000mm |
| Tafole ea Mosebetsi | Tafole ea ho sebetsa ea khekhe ea linotsi |
| Boemo bo Nepahetseng | ±0.1mm |
| Sistimi ea Motion | Enjene ea mohato |
| Mokhoa oa ho Pholisa | Mocheso o tsitsitseng oa metsi a batang |
| Sistimi ea Exhaust | 550W / 1.1KW Fane ea ho felloa ke matla |
| Sistimi ea ho Fokotsa Moea | Mini air compressor |
| Phepelo ea motlakase | AC220V ± 5% 50/60Hz |
| Sebopeho sa Graphic se tšehelitsoe | AI, BMP, PLT, DXF, DST |
Goldenlaser MARS Series CO2 Laser Systems Kakaretso
Ⅰ. Laser Cutting Engraving Machine e nang le Honeycomb Working Table
| Mohlala No. | Hlooho ea laser | Sebaka sa ho sebetsa |
| JG-10060 | Hlooho e le 'ngoe | 1000mmx600mm |
| JG-13070 | Hlooho e le 'ngoe | 1300mmx700mm |
| JGHY-12570 II | Hlooho e 'meli | 1250mmx700mm |
| JG-13090 | Hlooho e le 'ngoe | 1300mm×900mm |
| MJG-14090 | Hlooho e le 'ngoe | 1400mm×900mm |
| MJGHY-14090 II | Hlooho e 'meli | |
| MJG-160100 | Hlooho e le 'ngoe | 1600mm×1000mm |
| MJGHY-160100 II | Hlooho e 'meli | |
| MJG-180100 | Hlooho e le 'ngoe | 1800mm×1000mm |
| MJGHY-180100 II | Hlooho e 'meli |
Ⅱ. Mochini oa ho Seha Laser o nang le Lebanta la Conveyor
| Mohlala No. | Hlooho ea laser | Sebaka sa ho sebetsa |
| MJG-160100LD | Hlooho e le 'ngoe | 1600mm×1000mm |
| MJGHY-160100LD II | Hlooho e 'meli | |
| MJG-14090LD | Hlooho e le 'ngoe | 1400mm×900mm |
| MJGHY-14090D II | Hlooho e 'meli | |
| MJG-180100LD | Hlooho e le 'ngoe | 1800mm×1000mm |
| MJGHY-180100 II | Hlooho e 'meli | |
| JGHY-16580 IV | Hlooho tse nne | 1650mmx800mm |
Ⅲ. Laser Cutting Engraving Machine e nang le Sistimi ea Phahamisa Tafole
| Mohlala No. | Hlooho ea laser | Sebaka sa ho sebetsa |
| JG-10060SG | Hlooho e le 'ngoe | 1000mmx600mm |
| JG-13090SG | 1300mm×900mm |
Lisebelisoa tse Ts'ebetsong:
Lesela, letlalo, pampiri, khateboto, lehong, acrylic, foam, EVA, joalo-joalo.
Liindasteri tse ka sehloohong tsa kopo:
›Indasteri ea papatso: matšoao a papatso, libeche tsa lipoleiti tse mebala e 'meli, litulo tsa li-acrylic, joalo-joalo.
›Indasteri ea mesebetsi ea matsoho: bamboo, lehong le mesebetsi ea matsoho ea acrylic, mabokose a liphutheloana, likhau, likhau, liplaka, ho betla litšoantšo, jj.
›Indasteri ea liphahlo: ho seha lisebelisoa tsa liaparo, li-collars le li-sleeve seha, mokhabiso oa mokhabiso oa masela a betliloeng ka masela, ho etsa sampole ea liaparo le ho etsa poleiti, jj.
›Indasteri ea lieta: Letlalo, lisebelisoa tse kopaneng, masela, microfiber, jj.
›Indasteri ea mekotla le lisutuk'heise: Ho seha le ho betla letlalo la maiketsetso, letlalo la maiketsetso le masela, jj.
Laser Cutting Engraving Mehlala
Ka kopo ikopanye le goldlaser bakeng sa lintlha tse ling. Karabo ea hau lipotsong tse latelang e tla re thusa ho khothaletsa mochini o loketseng ka ho fetisisa.
1. Tlhokahalo ea hau ea mantlha ea ts'ebetso ke efe? Laser cutting kapa laser fatling (ho tšoaea) kapa laser perforating?
2. Ke lintho life tseo u li hlokang ho etsa laser?
3. Boholo le botenya ba thepa ke bofe?
4. Ka mor'a hore laser e sebetsoe, thepa e tla sebelisoa bakeng sa eng? (indasteri ea kopo) / Sehlahisoa sa hau sa ho qetela ke sefe?
5. Lebitso la k'hamphani ea hau, sebaka sa marang-rang, Email, Tel (WhatsApp / WeChat)?
Nomoro ea Mohlala: MJG-160100LD / MJGHY-160100LDII
