I-CCD Laser Cutter Yelebula Elukiweyo, Iziqephu Ezifekethisiwe
Inombolo Model: ZDJG-9050
Isingeniso:
I-laser cutter iza nekhamera ye-CCD efakwe ekhanda le-laser. Izindlela zokuqaphela ezihlukile zingakhethwa ngaphakathi kwesofthiwe yohlelo lokusebenza oluhlukile. Ilungele ikakhulukazi ama-patches namalebula ukusikwa.
LokhuIkhamera ye-CCD laser cutteryakhelwe ngokukhethekile ukuqashelwa okuzenzakalelayo kanye nokusikwa kwamalebula endwangu nesikhumba ahlukahlukene njengamalebula alukiwe, amapheshi okufekethisa, amabheji nokunye.
Isofthiwe ye-Goldenlaser enelungelo lobunikazi inezindlela ezihlukahlukene zokuqashelwa, futhi ingalungisa futhi inxephezele izithombe ukuze igweme ukuchezuka namalebula agejiwe, iqinisekise ukusika okunejubane eliphezulu nokunembile kwamalebula efomethi egcwele.
Uma kuqhathaniswa nabanye abasiki be-laser bekhamera ye-CCD emakethe, i-ZDJG-9050 ifaneleka kakhulu ukusika amalebula anohlaka olucacile nosayizi omncane. Ngenxa yendlela yokukhipha i-contour yesikhathi sangempela, amalebula ahlukene akhubazekile angalungiswa futhi asikwe, ngaleyo ndlela kugwenywe amaphutha abangelwa ukuchetshwa komphetho. Ngaphezu kwalokho, inganwetshwa futhi inkontileke ngokuya nge-contour ekhishiwe, isuse isidingo sokwenza izifanekiso ngokuphindaphindiwe, kube lula kakhulu ukusebenza nokuthuthukisa ukusebenza kahle.
Izici Eziyinhloko
Imininingwane
| Indawo yokusebenza (WxL) | 900mm x 500mm (35.4” x 19.6”) |
| Ithebula lokusebenza | Ithebula elisebenzayo lekhekheba lezinyosi (I-Static / Shuttle) |
| Isofthiwe | Isoftware ye-CCD |
| Amandla e-laser | 65W, 80W, 110W, 130W, 150W |
| Umthombo we-Laser | CO2 DC ingilazi laser tube |
| Uhlelo lokunyakaza | Isinyathelo motor / Servo motor |
| Ukunikezwa kwamandla kagesi | I-AC220V±5% 50 / 60Hz |
| Ifomethi Yomfanekiso Isekelwe | PLT, DXF, AI, BMP, DST |
| Indawo yokusebenza (WxL) | 1600mm x 1000mm (63” x 39.3”) |
| Ithebula lokusebenza | Ithebula lokusebenza le-Conveyor |
| Isofthiwe | Isoftware ye-CCD |
| Amandla e-laser | 65W, 80W, 110W, 130W, 150W |
| Umthombo we-Laser | CO2 DC ingilazi laser tube |
| Uhlelo lokunyakaza | Isinyathelo motor / Servo motor |
| Ukunikezwa kwamandla kagesi | I-AC220V±5% 50 / 60Hz |
| Ifomethi Yomfanekiso Isekelwe | PLT, DXF, AI, BMP, DST |
Isicelo
Izinto Ezisebenzayo
Indwangu, isikhumba, izindwangu ezilukiwe, izindwangu eziphrintiwe, izindwangu eziphothiwe, njll.
Izimboni Ezisebenzayo
Izingubo, izicathulo, izikhwama, imithwalo, impahla yesikhumba, amalebula alukiweyo, i-embroidery, i-applique, ukuphrinta indwangu nezinye izimboni.
Imingcele Yezobuchwepheshe yomshini wokusika wekhamera ye-CCD laser
| Imodeli | I-ZDJG-9050 | I-ZDJG-160100LD |
| Uhlobo lwe-laser | CO2 DC ingilazi laser tube | |
| Amandla e-laser | 65W, 80W, 110W, 130W, 150W | |
| Ithebula lokusebenza | Ithebula elisebenzayo lekhekheba lezinyosi (I-Static / Shuttle) | Ithebula lokusebenza le-Conveyor |
| Indawo yokusebenza | 900mm×500mm | 1600mm×1000mm |
| Isistimu ehambayo | Isinyathelo motor | |
| Isistimu yokupholisa | Izinga lokushisa elijwayelekile lokupholisa amanzi | |
| Amafomethi ezithombe asekelwayo | PLT, DXF, AI, BMP, DST | |
| Ukunikezwa kwamandla kagesi | I-AC220V±5% 50 / 60Hz | |
| Izinketho | I-Projector, isistimu yokubeka amachashazi abomvu | |
I-Goldenlaser's Full Range of Vision Laser Cutting Systems
Ⅰ I-Smart Vision Dual Head Laser Cutting Series
| Imodeli No. | Indawo yokusebenza |
| QZDMJG-160100LD | 1600mm×1000mm (63”×39.3”) |
| QZDMJG-180100LD | 1800mm×1000mm (70.8”×39.3”) |
| QZDXBJGHY-160120LDII | 1600mm×1200mm (63”×47.2”) |
Ⅱ I-High Speed Scan On-the-Fly Cutting Series
| Imodeli No. | Indawo yokusebenza |
| I-CJGV-160130LD | 1600mm×1300mm (63”×51”) |
| I-CJGV-190130LD | 1900mm×1300mm (74.8”×51”) |
| I-CJGV-160200LD | 1600mm×2000mm (63”×78.7”) |
| I-CJGV-210200LD | 2100mm×2000mm (82.6”×78.7”) |
Ⅲ Ukusika Okunembe Kakhulu Ngamamaki Okubhalisa
| Imodeli No. | Indawo yokusebenza |
| I-JGC-160100LD | 1600mm×1000mm (63”×39.3”) |
Ⅳ Uchungechunge Olukhulu Lokusika Ifomethi ye-Laser
| Imodeli No. | Indawo yokusebenza |
| ZDJMCJG-320400LD | 3200mm×4000mm (126”×157.4”) |
Ⅴ Ikhamera ye-CCD Laser Cutting Series
| Imodeli No. | Indawo yokusebenza |
| I-ZDJG-9050 | 900mm×500mm (35.4”×19.6”) |
| I-ZDJG-160100LD | 1600mm×1000mm (63”×39.3”) |
| I-ZDJG-3020LD | 300mm×200mm (11.8”×7.8”) |
Izinto Ezisebenzayo
Indwangu, isikhumba, izindwangu ezilukiwe, izindwangu eziphrintiwe, izindwangu eziphothiwe, njll.
Izimboni Ezisebenzayo
Izingubo, izicathulo, izikhwama, imithwalo, impahla yesikhumba, amalebula alukiweyo, i-embroidery, i-applique, ukuphrinta indwangu nezinye izimboni.
Sicela uxhumane ne-goldenlaser ukuze uthole ulwazi olwengeziwe. Impendulo yakho yemibuzo elandelayo izosisiza ukuthi sincome umshini ofaneleka kakhulu.
1. Iyini imfuneko yakho eyinhloko yokucubungula? Ukusika i-laser noma ukuqoshwa kwe-laser (ukumaka) noma ukugqobhoza nge-laser?
2. Yiziphi izinto ezidingekayo ukuze inqubo laser?
3. Bungakanani usayizi nokujiya kwempahla?
4. Ngemva kokucutshungulwa kwe-laser, izosetshenziswa ngani impahla? (imboni yesicelo) / Uyini umkhiqizo wakho wokugcina?
5. Igama lenkampani yakho, iwebhusayithi, i-imeyili, iTel (WhatsApp / WeChat)?
